Serving Bucks & Montgomery Counties, Southeastern Pennsylvania and nearby New JerseyServing Southeastern PA & nearby NJMon–Fri 8am–8pm · Sat 8am–2pm · Customer Login

Stucco Inspections: What to Expect Before, During and After

Stucco Inspections: What to Expect Before, During and After

A stucco inspection can mean a quick look or drilling small test holes. Here is how visual and probe testing differ, what a report contains and what to ask first.

Estimated Read Time:

Share:

Before and after: home exterior re-sided by Infinity Home Remodeling

If you are buying, selling or simply living in a stucco home in Bucks or Montgomery County, sooner or later someone will mention a “stucco inspection.” The phrase covers a few very different things, from a quick look at the outside of the house to drilling small test holes and measuring the moisture in the wood behind the wall. Knowing which one you are getting, and what the results can and cannot tell you, makes the whole process far less stressful.

This guide walks through what a stucco inspection usually involves, how visual and invasive testing differ, what a report typically contains and the questions worth asking before anyone starts. If you want the background on why stucco walls can trap water in the first place, start with our article on stucco moisture problems in Pennsylvania homes.

A standard home inspection is not a stucco test

Many buyers assume their general home inspection covers stucco moisture. In Pennsylvania it usually does not. The Pennsylvania Association of Realtors explains that under the state’s Home Inspection Law, a home inspection is “a non-invasive, visual examination” of two or more major components of a home. The association also notes that a home inspector should not drill into stucco to test for moisture below the surface, and that under the standard agreement of sale all inspections are non-invasive unless the parties agree otherwise in writing.

In practice, that means probe testing is usually a separate service, scheduled and paid for separately, and in a sale it needs the seller’s written permission because it puts holes in the seller’s walls.

Level one: the visual inspection

A visual or non-invasive inspection looks at the surface of the stucco without damaging it. An inspector walks the outside of the house and looks for clues such as:

  • Staining around the corners of windows
  • Dark spots where a roof meets a wall
  • Visible cracks in the stucco
  • Missing kick-out flashing where a roof edge meets a wall
  • Discoloration, bubbling paint, or soft or deteriorating trim
  • The bottom edge of the wall, where a weep screed is meant to let water drain out

The U.S. Department of Energy’s Building America Solution Center shows an example where missing kick-out flashing led to discoloration and water damage behind stucco next to a second-story window. It also notes that flashing tape and housewrap are hard to see without opening walls or removing trim, so an exterior check only reveals part of the picture.

Benjamin Obdyke, a manufacturer of moisture-management products, says staining and cracks like these can suggest moisture behind the stucco, but that a subsurface problem can only be confirmed through a professional inspection. A visual check is a useful first screen. It cannot tell you whether the sheathing behind a clean-looking wall is wet.

Where infrared cameras fit

Some inspectors add thermal (infrared) imaging, which shows surface temperature differences. Home inspection firm U.S. Inspect cautions that outdoor temperatures can skew the images, that interpreting them takes significant training, and that the results are often not definitive. Even after a camera flags a suspicious area, U.S. Inspect says invasive probing is still needed to verify the moisture content of the structure underneath.

Level two: invasive (probe) testing

For conventional hard-coat stucco, invasive probe testing is the method most often recommended. U.S. Inspect describes it as the most accurate way to assess homes with conventional hard-coat stucco. Here is what typically happens:

  • Targeted locations. Probes go where water is most likely to get in: around windows, doors, roof-to-wall junctions and utility penetrations. A Minnesota inspection firm, Structure Tech, describes placing holes under most windows and at other likely moisture entry points.
  • Small holes. The same firm describes drilling pairs of 3/16-inch holes through the stucco and inserting a probe meter to read the moisture content of the sheathing and framing behind it.
  • Sealing up. Holes are filled, often with caulk, when testing is done. Structure Tech notes it tries to match the color, but the patches may be noticeable on close inspection.
  • Access and time. The tester needs access to every side of the house, and the work can take several hours.

Older guidance from U.S. Inspect also explains why “wet wall” meters that work on synthetic stucco (EIFS) are not reliable on hard-coat stucco: the metal lath inside the stucco disturbs the meter’s signal and can produce false positives.

Level three: opening the wall

When probe readings point to a problem, the next step may be removing a section of stucco to look directly at the sheathing, flashing and framing. ASTM E2128, the Standard Guide for Evaluating Water Leakage of Building Walls, covers methods for finding the causes of wall leaks and acknowledges that some techniques may be intrusive, disruptive or destructive. It also says the investigator should set limits on those techniques and plan for patching and reconstruction. A 2016 6abc report on stucco problems in the Philadelphia suburbs described this kind of destructive testing as peeling back layers of the house.

What a stucco report usually contains

Reports vary by firm, so ask to see a sample before you hire anyone. According to a Redfin guide to stucco inspections, a report generally includes:

  • The moisture readings taken, tied to their locations on the house
  • Photos of each elevation and of problem areas
  • Notes on observed conditions, such as cracks, staining and flashing details
  • Recommendations for repairs, if needed

The same guide says many inspections take one to three hours depending on how much stucco the house has, and that reports often arrive within a day or two. When you read the report, look for where the high readings cluster. A wet area under one window tells a different story than elevated readings on every side of the house.

Who should do the testing

Stucco testing is usually done by firms that specialize in it, separate from the general home inspector. One point from the 6abc reporting is worth repeating: experts in that report urged homeowners to use different people for the inspection and the remediation, and a building scientist called it a conflict of interest for someone fixing these problems to also be the one testing. As a contractor that does stucco removal and re-cladding, we think that is sound advice: an independent report gives you a cleaner basis for comparing repair proposals.

Questions to ask before testing

  • Is this a visual inspection, infrared scan, invasive probe test, or a combination?
  • How many probe locations do you plan, and how do you choose them?
  • What do you use to seal the holes, and will the patches show?
  • What reading do you treat as elevated, and how do you confirm a high reading?
  • Can I see a sample report?
  • Do you also perform repairs? If so, how do you keep testing and repair separate?
  • If I am buying, has the seller given written permission for invasive testing?

After the report

If the readings are normal, keep the report with your house records so you have a baseline to compare against later. If problems are found, the options range from a localized repair to full remediation or switching to siding. We cover how those choices are made in our guide to stucco removal and on our siding replacement page.

Frequently asked questions

Does a regular home inspection check for stucco moisture?

Usually not. In Pennsylvania, a home inspection is a non-invasive, visual examination, and the Pennsylvania Association of Realtors notes that a home inspector should not drill into stucco. Probe testing is typically a separate service.

Is an infrared scan enough?

It can point to areas worth checking, but its results are often not definitive. For hard-coat stucco, invasive probing is still needed to confirm moisture in the structure behind the wall.

Will probe testing leave holes in my house?

Yes, small ones. They are typically filled with caulk after testing. Patches may be noticeable on close inspection, so ask the tester how they seal and color-match.

Should the company that tests my stucco also repair it?

Experts quoted in a 2016 6abc report recommended using different firms for testing and remediation to avoid a conflict of interest. It is a reasonable practice no matter who you hire.

Already have a stucco report and want to talk through what it means for your house? Request a free estimate and we will walk the house with you. For the technical side, see ASTM E2128, the standard guide for evaluating water leakage of building walls.

Other Posts