Serving Bucks & Montgomery Counties, Southeastern Pennsylvania and nearby New JerseyServing Southeastern PA & nearby NJMon–Fri 8am–8pm · Sat 8am–2pm · Customer Login

Roofing Warranties Explained: Material, Workmanship and System Coverage

Roofing Warranties Explained: Material, Workmanship and System Coverage

A new roof usually comes with more than one warranty. Here is the difference between material, workmanship and enhanced system warranties, and what to check before you sign.

Estimated Read Time:

Share:

Dark gray shingle roof with dormers on a gray-sided home, seen from above

Roofing quotes often mention a “lifetime” or “50-year” warranty, and two quotes for similar shingles can come with very different coverage. That is because a new roof usually involves more than one warranty: one from the company that made the materials, and one from the contractor who installed them. Some manufacturers also offer upgraded warranties that combine the two.

This guide explains the main types of roofing warranties, what each one usually covers, and what to ask before you sign. It is general information, not legal advice. The only thing that controls your coverage is the actual warranty document, so read it.

The three kinds of roofing warranty

1. Manufacturer material warranty

Shingle manufacturers warrant their products against manufacturing defects. Owens Corning explains that manufacturer warranties generally protect only the roofing materials, and they assume the contractor followed proper installation procedures. CertainTeed similarly says manufacturers warrant the roofing material against defects in manufacturing, while contractors warrant their workmanship.

Pay close attention to the word “lifetime.” Owens Corning, for example, says on its warranty page that lifetime coverage means the warranty is in effect for manufacturing defects as long as you own your home. Many material warranties also have an initial period with fuller coverage, after which coverage is reduced. The details vary by manufacturer and product line.

2. Contractor workmanship warranty

Because material warranties assume proper installation, problems caused by the installation itself are generally covered, if at all, by the installer’s workmanship warranty. Owens Corning describes workmanship warranties as warranties from the roofing contractor that cover installation quality. CertainTeed’s homeowner guide notes that contractor workmanship warranties typically run one to five years, but terms differ from company to company, so ask for yours in writing.

3. Enhanced or system warranties

Many manufacturers offer upgraded warranties when a roof is installed by a contractor they have credentialed and built with a set of the manufacturer’s own components. Owens Corning, for example, lists hip and ridge shingles and underlayment among the components its upper tiers require. Some of these include workmanship coverage backed by the manufacturer.

As one example, Owens Corning’s warranty page lists four tiers:

  • Standard Product Limited Warranty: no contractor credential required, as long as installation instructions and local codes are followed.
  • System Protection: must be installed by an Owens Corning Roofing Platinum or Preferred Contractor and requires certain Owens Corning components; no workmanship coverage.
  • Preferred Protection: adds 10 years of workmanship coverage.
  • Platinum Protection: must be installed by an Owens Corning Roofing Platinum Contractor; workmanship coverage is listed as limited lifetime, with coverage reduced after 25 years based on the age of the roof.

CertainTeed’s homeowner guide describes a similar structure: standard SureStart protection on its shingles, and extended SureStart PLUS coverage that only contractors with certain CertainTeed credentials can offer. Other manufacturers have their own tiers and names. These are published terms at the time of writing; check the manufacturer’s current document for the exact product you are buying.

Registration: the step people miss

Registration rules vary by manufacturer and warranty level. The Federal Trade Commission notes that you sometimes have to return a product registration card before you qualify for warranty service. Owens Corning advises homeowners to register their warranty according to the manufacturer’s guidelines once the project is complete, and offers online registration.

Ask your contractor who is responsible for registering the warranty, and ask for a copy of the registration or certificate once it is done.

Transferring a warranty when you sell

If you might sell your home, transferability matters. Owens Corning’s guidance points out that:

  • It is uncommon for workmanship warranties issued by the contractor to be transferable.
  • Many manufacturer warranties can be transferred only one time.
  • Coverage on some components may be reduced at transfer based on the roof’s age.
  • Some manufacturers charge a fee. For Owens Corning shingle warranties, the transfer must be submitted within 60 days of the real estate closing, and its warranty page says a fee “upwards of $100” may apply.

CertainTeed’s guide says its SureStart protection can be transferred from the original homeowner to the next owner. As always, the warranty document has the final word.

What to ask before you sign

  • Which warranty is included in this price? Get the exact name of the manufacturer warranty, not just “lifetime.”
  • Does it require a credentialed installer or specific components? If so, confirm the contractor holds the credential and the quote lists those components.
  • What does the workmanship warranty cover, and for how long? Ask for it in writing.
  • Who registers the warranty, and when?
  • Is it transferable, and is there a fee or deadline?
  • What is excluded? The FTC advises that if something is not listed as covered, you should assume it is not covered.

CertainTeed recommends asking for a copy of both the contractor and the manufacturer warranty, and says the length of a warranty is less important than what it covers. The FTC adds that, by law, a warranty must be available for you to read before you buy, and that you should keep a copy along with your receipt.

For more on vetting contractors, see our guide on how to choose a roofer in Bucks and Montgomery County. If you are comparing shingle lines, our GAF Timberline HDZ vs. UHDZ comparison covers two popular options.

Frequently asked questions

Does a lifetime shingle warranty cover installation mistakes?

Usually not. Owens Corning explains that manufacturer warranties generally cover only the materials and assume proper installation. Installation problems are covered by a workmanship warranty, either from the contractor or, with some enhanced warranties, backed by the manufacturer.

What does “lifetime” mean on a roofing warranty?

It depends on the manufacturer. Owens Corning, for example, defines lifetime coverage as lasting for manufacturing defects as long as you own your home. Read the definition in your own warranty document.

Can I transfer my roof warranty to a buyer?

Often, but with limits. Owens Corning notes that many warranties transfer only once, that contractor workmanship warranties are rarely transferable, and that its own transfers must be submitted within 60 days of closing.

Do I need to register my roofing warranty?

It depends on the manufacturer and the warranty level. The FTC notes that some warranties require registration before you qualify for service. Ask your contractor who will register it, and keep a copy of the confirmation with your contract and receipt.

If you are comparing roofing quotes, ask us which manufacturer warranty applies to the materials we propose and what our workmanship coverage includes. Learn more about our roof replacement service or request a free estimate. For general consumer guidance, see the FTC’s guide to warranties.

Other Posts