Gutters catch the water, but where that water ends up is decided at the bottom of the downspout. A gutter system can be in perfect shape and still dump roof runoff right next to the foundation. If you have a damp basement corner, washed-out mulch beds, or a puddle that always forms in the same spot, the fix is often at ground level, not up on the roof.
This guide focuses on what happens after the water leaves the gutter: downspout extensions, splash blocks, underground drains, grading, and the one roof detail that keeps water from running down your walls. If you are still deciding whether your gutters themselves need work, start with our guide on when to replace gutters.
Why the ground around your house matters
The U.S. Department of Energy’s Building America Solution Center puts it simply: the best defense against water coming through the foundation is to keep the soil around it from getting saturated in the first place. It also notes that building materials that stay damp for long periods will eventually fail. Every downspout is either helping with that or working against it.
Downspout extensions: get the water out at least 5 feet
Building America’s guidance for downspouts that discharge above ground is specific:
- Extend the pipe from the downspout at least 5 feet from the building.
- Use non-perforated pipe, such as flexible ABS or Schedule 40 PVC, so water is not leaked out along the way next to the house.
- Pitch the pipe away from the foundation at a minimum of 5/8 inch per foot (about a 5% slope).
- The end of the pipe must empty onto ground that slopes away from the house. A discharge onto flat or back-sloping ground just lets the water find its way back.
A common problem is the short elbow that points water at the base of the wall, or a flexible extension that has been kicked aside, crushed by a mower, or disconnected. Walk the house and look at where each downspout really ends.
Splash blocks
A splash block at the end of the pipe is not a substitute for the extension, but it helps. Building America notes that a splash block placed at the end of the lateral pipe helps control erosion at that spot. Without one, a strong discharge can dig a hole in the lawn or wash out a garden bed.
Underground drains: farther out, and never into the foundation drain
Many homeowners prefer to bury downspout drains so there are no pipes across the yard. That can work well, but the details matter. Building America recommends:
- Use non-perforated, smooth or corrugated plastic pipe.
- Slope it at least 1/2 inch per foot away from the home for at least 10 feet.
- Terminate it to daylight (onto sloped grade that carries water away), to a catchment system, or to a storm sewer where allowed.
- Do not connect the gutter drain to the perforated foundation drain. Building America warns that this practice will soak the foundation, because the foundation drain is designed to collect water, not carry roof runoff away.
You cannot see a buried line, so watch for the signs of trouble. If water backs up out of the downspout during a storm, or the outlet is dry while the downspout is full, the underground line needs attention. Before digging for any new drain line, call 811 so underground utilities can be marked; the American Wood Council gives the same reminder in its deck guide.
Check local rules before redirecting water
The EPA encourages “disconnecting” downspouts from paved surfaces or pipes and redirecting the water to a lawn, garden or rain barrel where it can soak into the ground. The EPA also cautions that this may not be appropriate for every location, and to consider local regulations and where the water will go so it does not cause property damage. In practice, that means not aiming runoff at a neighbor’s yard, across a sidewalk, or toward a low spot near another part of the house. Your township may have its own rules about connecting to storm sewers.
Rain barrels and rain gardens
Rain barrels can be a good use for roof water, with one catch. Building America shows the correct setup as a barrel with an overflow spout that terminates at least 5 feet from the foundation. A barrel that overflows next to the wall puts the water right back where you did not want it.
If you want a rain garden, Building America says it should be more than 10 feet from the house.
Grading: the ground should fall away from the house
Even well-placed downspouts do not help much if the soil slopes toward the foundation. Building America recommends:
- Soil and other permeable surfaces: slope away from the house at least 1/2 inch per foot for 10 feet, which works out to about 6 inches of fall.
- Hard surfaces like patios, walks and driveways: Building America says the International Residential Code (2009, 2012 and 2015 editions) requires impervious surfaces within 10 feet of the foundation to slope 2% away from the building.
- Tight lots: where a property line, wall or other obstacle prevents that much fall within 10 feet, provide swales or drains to carry water away.
- Settling: backfill next to a foundation should be compacted to prevent later settling.
Patios and walks that have sunk and now tilt toward the house deserve a close look. Building America notes that because these surfaces do not absorb water, a backward slope sends runoff straight to the foundation, which can lead to water intrusion, structural problems, mold and pest activity.
Kick-out flashing: the small part that protects walls
Not every water problem starts at the ground. Where a lower roof runs into a wall that continues past the roof edge, water racing down the roof can shoot past the end of the gutter and run down the siding. Building America recommends kick-out flashing, a diverter that turns that water into the gutter, at all roof-wall intersections.
Signs that kick-out flashing is missing or not doing its job, according to Building America:
- Streaks or stains on the siding below where a roof meets a wall.
- Damaged window trim or sills below that spot.
- Peeling paint or warped siding nearby.
- Trim that feels soft or spongy when pressed.
Building America’s advice is to hire a contractor if this detail is missing or needs attention, because water getting behind the siding can do damage you cannot see from outside. It is often fixed alongside roofing or siding work.
A simple rainy-day walkaround
- Is each downspout connected at the top and bottom, with no leaks at the joints?
- Does each one discharge at least 5 feet out onto ground that slopes away?
- Is any water bubbling up, backing up or puddling near buried drain lines?
- Are there puddles, soggy areas or erosion along the foundation?
- Is water spilling off a roof edge onto a wall where a roof meets siding?
Frequently asked questions
How far should a downspout extension go?
The Building America Solution Center recommends extending above-ground downspout piping at least 5 feet from the building, sloped away at 5/8 inch per foot or more, and emptying onto ground that slopes away from the house.
Can I connect my downspouts to the drain around my foundation?
No. Building America warns not to connect the gutter drain pipe to the perforated foundation drain, because doing so will soak the foundation. Roof water should go to a separate, non-perforated line.
How much should the ground slope away from my house?
Building America recommends at least 1/2 inch per foot for 10 feet on soil, about 6 inches total. It says the IRC requires hard surfaces within 10 feet of the foundation to slope 2% away. Where there is not enough room, use swales or drains.
What is kick-out flashing and do I need it?
It is a diverter at the bottom of a roof-wall intersection that turns water into the gutter instead of down the wall. Building America recommends it at all roof-wall intersections.
If water is collecting around your foundation or running down your walls, we can check your gutters, downspouts and roof-to-wall details and recommend practical fixes. See our gutter services, or request a free estimate. You can also read the Building America guide to grading away from the foundation.
